Koala KB200 Horizontal Wall Mounted Baby Changing Station
Free Shipping On Orders over $500Standard shipping for this item is $25 for orders under $500
- KOALA KARE® surface-mounted, horizontal-folding, polyethylene baby changing station.
- While the KB200 is available in 4 Different Colors [Cream (00), Grey (01), White Granite (05), and Earth (11)] - this listing is for the KB200-00 cream.
- Exclusive to KOALA KARE® products, the bed surface contains Microban® antimicrobial additive permanently embedded into the plastic, reducing damaging & odor causing microbial growth.
- Built to meet or exceed the stringent standards set by public and private regulatory agencies.
- Steel-on-steel hinge mechanism with 11GA steel mounting supports
- Built-in, locking, dual-cavity liner dispenser. Either cavity can dispense sanitary liners (KB150-99) and/or diaper disposal sacks (KB160).
- Includes child protection straps (replaceable).
- Two built-in bag or purse hooks.
- Contoured changing surface area is a large 450 sq. in (2903 sq. cm).
- Easy to install using basic tools.
- Concealed gas spring mechanism ensures smooth, quiet, & safe open and close.
- Meets ASTM safety standards, plus ANSI & ADA requirements when properly installed.
- Backed by Manufacturer's Five-Year Limited Warranty on Materials and Workmanship.
- LEED Credit Eligible. Constructed with 16% recycled materials.
- Made in the U.S.A.
- PLEASE NOTE: Sanitary Liners (optional) also available for use with this item. See separate listing by this seller. Box of 500 liners for $40.69 with shipping included.
- PLEASE NOTE: Disposable diaper bags (optional) also available for use with this item. See separate listing by this seller - The Diaper Pouch™ of 175 bags for $32 with shipping included.
- 36-3/16” W x 22-1/4” H (919mm x 565mm)
- Depth (closed): 4” (102mm)
- Depth or Extension (open): 23-3/16" (589mm)
MATERIALS & FINISHES
- Exterior: Cream Polyethylene
- Interior: Cream Polyethylene with Microban® (exclusive to Koala®)
This durable and attractive horizontal-folding baby changing station (Koala Kare® KB200-00) is made of blow-molded, high-density polyethylene (CREAM in color) with MICROBAN® antimicrobial additive permanently embedded into the plastic. It is easy to clean and resistant to odors and both fungal & bacteria growth. Graphics and safety messages are molded into the polyethylene in four (4) different languages. In addition, a built-in, locking, two-cavity dispenser for sanitary liners (KB150-99) and/or diaper disposal sacks (KB160) is conveniently located just above the changing surface when folded open. Total capacity of the dispenser is approximately 50 liners if both cavities are used for liners. Neither liners nor diaper bags are included, but are available for purchase. See separate listings for these items in "Liners & Accessories).
The station is designed to be installed directly on to an existing wall surface using the included hardware. Six pre-drilled mounting holes in the back wall of the unit are designed for wood screws (provided) into wood studs on 16" centers. For installation on walls that do not have wood studs 16" on center or metal studs or concrete block, specialized fasteners or toggle fasteners may need to be obtained by the owner locally. Installation instructions (provided) address these different wall materials / scenarios. The station folds down horizontally so the the adult is facing the wall while changing the infant whose is laying parallel to the wall. With a reinforced steel-on-steel hinge running the full length of the station and with 11-gauge steel mounting chassis, the KB200-00 meets all ASTM requirements for static load performance when properly installed. Although designed for infants that weigh no more than 50 lbs., in testing the KB200-00 easily supported 200 lbs. with minimal deflection of the "bed" from horizontal. A pneumatic cylinder provides for easy, slow, and controlled opening and closing of the bed. Both the pneumatic cylinder and metal hinge mechanism are fully concealed (regardless of bed position) to eliminate tampering and possible pinch hazard.
The contoured changing surface area is 450 sq. in. (2903 sq. cm) and comes complete with nylon safety straps and two convenient bag or purse hooks built in. Folded closed the changer's dimensions are 35-3/16"W x 22-1/4"H x 4"D. When open the changer extends out from the wall surface 23-3/16". And when properly installed, this surface-mounted, horizontal-folding baby changing station complies with the highest Americans with Disabilities Act (ADA) regulations & ASTM safety standards.