All Bathroom Accessories

Shelf, 18 gauge type 304 stainless steel satin finish with front edge hemmed. Holds two 1800 sheet toilet tissue rolls and surface mounted

This sophisticated combination paper towel and waste receptacle cabinet is designed to be completely recessed into the plane of the washroom wall, ...

18" Towel bar fabricated of 1" (25 mm) O.D. x 20 gauge, type 304 stainless steel with a satin finish and designed not to turn in support posts. Sup...

Clear glass holder has raised ribs to elevate soap slightly above surface to promote drying. May be removed for cleaning. All other parts of the un...

Tubing 18 gauge and flanges 1/8" (3 mm) thick stainless steel type 304 with satin finish. Closure plate is 1/8" (3 mm) thick. All welded constructi...

Doors are attached to cabinet with welded on full length 3/16" diameter [Ø4.8] piano hinges and have hemmed returns and concealed overlap center to...

Accommodates one (1) Becton, Dickinson and Company (BD) Brand Sharps Collector model № 305443 (by others). Marked with graphic label indicating Bio...

Shower Curtain Rod with Flanges 78" L. Mounting screws are not provided.

Swing-Up Grab Bar is fabricated of stainless steel type 304 alloy 18-8 with a Satin finish. The bar has 1-1/2" diameter (Ø38) tubing hinge with (3)...

Swing-Up Grab Bar is fabricated of stainless steel type 304 alloy 18-8 with a Satin finish. The bar has 1-1/2" diameter (Ø38) tubing hinge and will...

Cover snaps over mounting flange dimples to conceal screws. Concealed mounting flange is 3 1/8" (79 mm) O.D. diameter with two screw holes and thre...

Cover snaps over mounting flange dimples to conceal screws. Concealed mounting flange is 3 1/8" (79 mm) O.D. diameter with two screw holes and thre...

Cover snaps over mounting flange dimples to conceal screws. Concealed mounting flange is 3 1/8" (79 mm) O.D. diameter with two screw holes and thre...

Waste receptacle is free standing and should be placed in appropriate position on finished floor. Holds 8 gal (30.7 L) of waste material. Top is at...

Surface Mounted Stainless Steel Swing Door Medicine Cabinet shall be fabricated of alloy 18-8 stainless steel, type 304, No. 20 gauge. All exposed ...

Swing door mirror frame is type 304 stainless steel with #4 satin finish. Mirror is 1/4" (6 mm), guaranteed for 15 years against silver spoilage. D...

Surface Mounted Sanitary Napkin Disposal shall have top cover door and cabinet of 22 gauge type 304 stainless steel alloy 18-8. Capacity shall be 1...

Surface Mounted Heavy-Duty Robe Hook shall be fabricated of brass with a chrome finisH Three (3) 1/4-28 cone point stainless steel hex socket set s...

Push door is self closing. A 12" x 12" x 12" (305 x 305 x 365 mm) waste receptacle is furnished to be placed directly below waste door on the vanit...

Free-Flow Towel Dispenser & Waste Disposal unit for counter-top mounting shall hold and dispense one (1) package of C-fold paper towels and sha...

Provides waste deposit access to receptacle (not furnished) placed directly below chute. Made of 16 gauge stainless steel, rolled flange and expose...

Cover snaps over mounting flange dimples to conceal screws. Concealed mounting flange is 3 1/8" (79 mm) O.D. diameter with two screw holes and thre...

Cover snaps over mounting flange dimples to conceal screws. Concealed mounting flange is 3 1/8" (79 mm) O.D. diameter with two screw holes and thre...

Cover snaps over mounting flange dimples to conceal screws. Concealed mounting flange is 3 1/8" (79 mm) O.D. diameter with two screw holes and thre...

Smooth - Horizontal Grab Bar, 18-1/8" x 33-1/8" - Grab Bar with Snap-On Flange Covers for concealed mounting's Cover snaps over mounting flange dim...

Smooth Horizontal Grab Bar, 54" x 42" - Grab Bar with Snap-On Flange Covers for concealed mounting's Cover snaps over mounting flange dimples to co...

Smooth Horizontal Grab Bar, 54" x 36" - Grab Bar with Snap-On Flange Covers for concealed mounting's Cover snaps over mounting flange dimples to co...

Smooth Horizontal Grab Bar 24"x36" - Grab Bar with Snap-On Flange Covers for concealed mounting's Cover snaps over mounting flange dimples to conce...

Smooth Horizontal Grab Bar, 54" x 36" - Grab Bar with Flanges for Exposed Mounting is 3" (76 mm) diameter, 1/8" (3 mm) thick type 304 stainless ste...

Smooth Horizontal Grab Bar 24"x36" - Grab Bar with Flanges for Exposed Mounting is 3" (76 mm) diameter, 1/8" (3 mm) thick type 304 stainless steel ...

Smooth Horizontal Grab Bar, 54" x 36" - Flange is 3" (76 mm) diameter, 1/8" (3 mm) thick type 304 stainless steel with a satin finish. Exposed moun...

Smooth Swing Away Grab Bar - Flange is 3" (76 mm) diameter, 1/8" (3 mm) thick type 304 stainless steel with a satin finish. Exposed mounting screw ...

Doors are attached to cabinet with welded on full length 3/16" diameter [Ø4.8] piano hinges. Outer door has all returns toward inside. Inner door h...

Fabricated of 22 gauge type 304 stainless steel with satin finish. Top and bottom edges hemmed for safety. Capacity: 15.5 gal. (59 L)