ASI 3413-25 Swing-Up Grab Bar With Integral Toilet Paper Holder, Stainless Steel, Satin Finish Exterior
Swing-up Grab Bar with Integral TP Roll Holder shall be fabricated of stainless steel type 304 alloy 18-8. Grab bar tubing shall be 18 gauge x 1-1/4" diameter. Mounting bracket shall be 9 gauge [5/32" thick (3.8)] plate with seven (7) 1/4" diameter mounting holes provided. Bar shall have 1-1/2" diameter tubing hinge and shall have a solid bar axle with adjustable friction sleeve balance. TP Roll Holder shall be 3/8" diameter solid formed rod with chamfered end. All exposed surfaces shall be satin finish. Structure shall be of welded construction. All exposed edges and corners shall be radiused and burr free. Tension for bar movement is accomplished by hex head clamp bolt provided. Grab bar shall be operable with only one hand. Bar mounting plate shall have a solid stop bumper to prevent raised bar from banging into wall.