Koala Kare KB311-SSRE-MBLK - Matte Black Recessed Vertical Stainless Steel Baby Changing Station
Koala Kare® KB311-SSRE-MBLK - Matte Black Recessed Vertical Stainless Steel Baby Changing Station
Dimensions:
- Overall Width x Height x Depth: 26-7/32”” x 41-5/16 x 4-7/32" (666 mm x 1050 mm x 107 mm) closed, excluding handles
- Overall Width x Height x Depth: 26-7/32” x 41-5/16" x 6-11/16 (666 mm x 1050 mm x 170 mm) closed, including handles
- Depth (closed, excluding handles): 1/4” (6 mm) protrusion from wall surface
- Depth (closed, including handles): 2-23/32"” (69 mm) protrusion from wall surface
- Depth (open): 32-27/32” (834 mm) protrusion from wall surface
- Rough Wall Opening: 21-1/2" W x 36-3/4" H x 4" D (791 mm x 549 mm x 102 mm)
Materials & Finish
- Exterior Front Panel: Deep-Drawn, One-Piece 20GA (0.91 mm) Stainless Steel with Matte Black Finish
- Exterior Flange: Deep-Drawn, One-Piece 18GA (1.2 mm) Stainless Steel with Matte Black Finish
- Exterior Handles: Injection Molded Aluminum with Satin Stainless Steel Finish (replaceable)
- Interior Chassis (Frame & Hinge Mechanism): 11GA Steel
- Interior: Grey Polypropylene with Microban® (exclusive to Koala®)
- External Bag Hook (KB310-54): Solid Stainless Steel Rod (7/8" diameter) with Brushed (No. 304) Finish
This newly designed, durable, and very attractive baby changing station (the KOALA® KB311-SSRE-MBLK) has an exterior front panel (20GA) and flange (18GA) that are crafted from one-piece, deep-drawn, seamless stainless steel with uniform grain and a matte black finish. Being made of one stainless steel piece, all seams, sharp edges, and weld lines are eliminated; the modern aesthetic is unparalleled. An updated KOALA® logo is laser etched into the stainless front panel. And with no visible plastic or adhesive labels applied to the front of the station, there's nothing to interfere with the beauty of the stainless. The interior bed is made of injection-molded, high-density polypropylene (GREY in color) with MICROBAN® antimicrobial additive permanently embedded into the plastic. It is easy to clean and resistant to odors and both fungal & bacteria growth. In addition, a newly-designed, built-in, locking, two-cavity dispenser for sanitary liners (KB150-99) and/or diaper disposal sacks (KB160) is conveniently located just above the changing surface when folded open. With the new integrated spring tab, only one liner is dispensed at a time. Total capacity of the dispenser is approximately 50 liners if both cavities are used for liners. Neither liners nor diaper bags are included, but are available for purchase. See separate listings for these items in "Liners & Accessories".
The Koala® KB311-SSRE-MBLK changing station is designed to be recess mounted into the wall using the included hardware. A framed-out rough wall opening of 21-1/2" W x 36-3/4" H (with a minimum depth of 3-31/32" or 101 mm from finished surface of wall) is required for installation, making this unit best for new construction or remodeling. The unit is secured into the opening using provided wood screws through six (6) pre-drilled side holes in the unit into the framed of the wall opening. The station folds down vertically so that the infant is laying perpendicular to the wall (head near the wall and feet out from the wall). With a reinforced steel-on-steel hinge running the full length of the station and with 11-gauge steel mounting chassis, the KB311-SSRE-MBLK meets all ASTM requirements for static load performance when properly installed. Although designed for infants that weigh no more than 50 lbs. and 3.5 years of age, in testing the KB311-SSRE-MBLK recessed changing table easily supported 300 lbs. with minimal deflection of the "bed" from horizontal. A pneumatic cylinder provides for easy, slow, and controlled opening and closing of the bed, requiring less than 5lbs of force. Both the pneumatic cylinder and metal hinge mechanism are fully concealed (regardless of bed position) to eliminate tampering and possible pinch hazard. Graphics and safety messages are provided in four (4) different languages.
The contoured changing surface area is 535 sq. in. (3452 sq. cm) and comes complete with a impervious, replaceable thermoplastic polyurethane (TPU) safety strap. Also included is an external bag hook (KB310-54) made from a solid stainless steel rod (7/8 in dia.) that is to be mounted on the wall next to the changing station, allowing for safe storage of and easy access to purse or diaper bag. And when properly installed, this changer complies with the highest Americans with Disabilities Act (ADA), American National Standards Institute (ANSI), and Texas Accessibility Standards (TAS) regulations.
